Pilot-scale synthesis · process validation
K10
Prove your materials process at pilot scale. Carry development work beyond benchtop synthesis with production-representative trials. Evaluate quality, throughput, reproducibility and process integration before committing to industrial production.
Discuss K10 with an engineer
Challenge

A promising material is not yet a manufacturable product.

  • Slow experimentation: Batch trial-and-error and manual preparation slow down particle and formulation optimisation.
  • Inconsistent quality at scale: Lab recipes often don’t give the reproducibility, documentation or representative samples that industrial adoption needs.
  • Capital-intensive production: Traditional scale-up needs new process engineering, a large footprint and major investment before commercial output is proven.
Solution

One process logic. From the first sample to production.

  • Engineer the material, not just the equipment: Use controlled high-shear mixing to target particle attributes and develop repeatable synthesis conditions.
  • Scale by multiplying controlled processes: Progress through K1, K10 and K100 using shared annular-flow principles and modular engineering.
  • Keep data and process knowledge connected: AMLearn assists with experiment orchestration, process data and optimisation workflows.
Product configuration

Specifications

Use these specifications to determine technical fit, then confirm reactor configuration, reagent chemistry, ancillary processing and operational requirements with the AM team.

FeaturesK10 StartK10 Pro
DosingContinuous Low Pulsation PumpingContinuous Low Pulsation Pumping, Automated Valves
Product CollectionNoneNone
Max Number of Reagents24
Automation LevelSingle Batch Dispensing, Manual Cleaning & LoadingContinuous Dispensing, Autonomous Reaction & Cleaning
Use CasesSingle Batch SynthesisMulti Sample Synthesis
SensorsPressurePressure
Dimensions35 x 10 x 4.2cm35 x 10 x 4.2cm
Weight400g400g
Wetted Materials SelectionETFE, PEEK, PP, Quartz, Stainless SteelETFE, PEEK, PP, Quartz, Stainless Steel
Minimum Micromixing Time0.5ms0.5ms
Maximum Shear Rate10⁶ s⁻¹10⁶ s⁻¹
Maximum Liquid Flowrate (Total)500 mL/min500 mL/min
Maximum Air Flowrate30 L/min30 L/min
Maximum Pressure7 bar7 bar
Reaction Length150 nm150 nm
Product photography

K10 system configurations

Your pilot programme

Three questions a K10 trial should answer.

Agree acceptance criteria before the pilot starts so the results can inform a real purchasing or scale-up decision.

Material specification

Does the product meet its targets? Evaluate material size, morphology, chemistry and relevant application performance against an agreed specification.

Repeatable processing

Can the process run reliably? Assess representative production runs, monitoring requirements, collection, cleaning and quality consistency.

Commercial readiness

Is the next scale justified? Establish target output, cost and integration assumptions to inform a K100 project or contract production route.
Next steps

Evaluate the product with your actual material.

Specify your target particle characteristics, existing method, material quantity and project timeline. AM can advise on fit, technical trials and procurement.

Request a technical meeting

Discuss reaction chemistry, available data and process objectives.

Plan a feasibility trial

Explore sample generation, quality criteria and production transfer.

Request a quotation

Scope hardware, software, controls and associated services.

Let's discuss your material

Know your target material. Not sure which reactor?

Speak with AM about your application, specification, stage and timeline. The initial discussion is the fastest route to the right technical scope.

Get in Touch

This field is for validation purposes and should be left unchanged.