Use these specifications to determine technical fit, then confirm reactor configuration, reagent chemistry, ancillary processing and operational requirements with the AM team.
| Features | K1 Start |
|---|---|
| Dosing | Continuous Low Pulsation Pumping |
| Product Collection | None |
| Max Number of Reagents | 2 |
| Automation Level | Single Batch Dispensing, Manual Cleaning & Loading |
| Use Cases | Single Batch Synthesis |
| Sensors | Pressure |
| Dimensions | 21.5 x 5.8 x 2.6cm |
| Weight | 200g |
| Wetted Materials Selection | ETFE, PEEK, PP, Quartz |
| Minimum Micromixing Time | 0.5 ms |
| Maximum Shear Rate | 10⁶ s⁻¹ |
| Maximum Liquid Flowrate (Total) | 20 mL/min |
| Maximum Air Flowrate | 5 L/min |
| Maximum Pressure | 7 bar |
| Reaction Length | 50 nm |
Best for laboratory teams screening chemistries, developing new nanomaterials and preparing recipes for pilot-scale evaluation.
Specify your target particle characteristics, existing method, material quantity and project timeline. AM can advise on fit, technical trials and procurement.

Let's discuss your material
Speak with AM about your application, specification, stage and timeline. The initial discussion is the fastest route to the right technical scope.