Use these specifications to determine technical fit, then confirm reactor configuration, reagent chemistry, ancillary processing and operational requirements with the AM team.
| Features | K10 Start | K10 Pro |
|---|---|---|
| Dosing | Continuous Low Pulsation Pumping | Continuous Low Pulsation Pumping, Automated Valves |
| Product Collection | None | None |
| Max Number of Reagents | 2 | 4 |
| Automation Level | Single Batch Dispensing, Manual Cleaning & Loading | Continuous Dispensing, Autonomous Reaction & Cleaning |
| Use Cases | Single Batch Synthesis | Multi Sample Synthesis |
| Sensors | Pressure | Pressure |
| Dimensions | 35 x 10 x 4.2cm | 35 x 10 x 4.2cm |
| Weight | 400g | 400g |
| Wetted Materials Selection | ETFE, PEEK, PP, Quartz, Stainless Steel | ETFE, PEEK, PP, Quartz, Stainless Steel |
| Minimum Micromixing Time | 0.5ms | 0.5ms |
| Maximum Shear Rate | 10⁶ s⁻¹ | 10⁶ s⁻¹ |
| Maximum Liquid Flowrate (Total) | 500 mL/min | 500 mL/min |
| Maximum Air Flowrate | 30 L/min | 30 L/min |
| Maximum Pressure | 7 bar | 7 bar |
| Reaction Length | 150 nm | 150 nm |
Agree acceptance criteria before the pilot starts so the results can inform a real purchasing or scale-up decision.
Specify your target particle characteristics, existing method, material quantity and project timeline. AM can advise on fit, technical trials and procurement.

Let's discuss your material
Speak with AM about your application, specification, stage and timeline. The initial discussion is the fastest route to the right technical scope.